Program
Files
No drivers or files are required unless you are using Apple
Remote Access, Open Transport PPP, or Internet Connection
(included with Mac OS X). These programs require a CCL (modem
script file) to enable the modem.
Zoom Universal CCLs
The Zoom Universal CCLs are modem script files that properly
enable your modem under Open Transport PPP, Apple Remote
Access, and Internet Connect (included with Mac OS X). We
do not provide custom scripts for other applications or uses.
If you require a custom script, please contact the maker
of the software you are using.
 |
Zoom
Universal CCLs (.bin file) StuffIt Expander
5.5 or later is needed to expand this file. If this
program
is not installed in your system, it
can be downloaded for free from Aladdin
Systems.
|
Firmware The
latest firmware update for your modem is version s0928b00-d.
This firmware also includes the Channel 2 call waiting detection
feature. This update is not necessary if the current firmware
version of your modem is 052099g-x (where x is a letter other
than "I") and you do not use call waiting.
NOTE: To determine the current firmware version
of your modem, open a terminal program such as MicroPhone
LT and select the port assigned to the modem. Then type the
command ATI3 (ati3) and press Return.
Both PowerPC- and 68K (680x0)-based processor versions
of the firmware uploader/installer application require at
least 4 MB of available RAM and Mac OS 7.5 or later (Mac
OS X users need to boot into Mac OS 9.x). To determine which
type of processor your computer has, select About This Computer
or About This Mac from the Apple menu.
 |
Firmware
update (PowerPC) (.sit
file) StuffIt Expander 5.5 or later is needed to
expand the downloaded file. If this program is not installed
in
your system, it
can be downloaded for free from Aladdin Systems. |
|
Firmware
update (68K) (.sit
file) StuffIt Expander 5.5
or later is needed to expand the downloaded file.
If this program is not installed in your system,
it
can be downloaded for free from Aladdin Systems. |
Chanel 2 Setup Application
The Channel 2 setup application
allows you to select a call waiting option. This application
is for use with Zoom USB and external serial modems that
have firmware version 052099g -I (see Firmware above).
Both PowerPC- and 68K (680x0)-based processor versions
of the Channel 2 setup application require at least 4 MB
of available RAM and Mac OS 7.5 or later (Mac OS X users
need to boot into Mac OS 9.x). To determine which type of
processor your computer has, select About This Computer or
About This Mac from the Apple menu.
|
